AS 3775.1 – 2014 Chain Slings for Lifting Purposes – Grade T(80) and V(100) Part 1: Product Specification
This Standard was prepared by the Standards Australia Committee ME-025, Lifting Tackle, to supersede AS 3775.1—2004, Chain slings—Grade T, Part 1: Product specification.
The objective of this Standard is to provide requirements for the manufacture, marking and testing of Grade T and V chain slings. The objective of all lifting tackle Standards is to provide users, regulatory and accrediting authorities and importers with a basis for identifying products which are safe and fit for their purpose.
For the purpose of this Standard, the definitions below apply.
3.1 Chain sling
An assembly of lifting components made in a configuration of one or more chain legs for attaching loads to the hook of a crane or other lifting appliance.
3.2 Competent person
A person who has, through a combination of training, education and experience, acquired knowledge and skills enabling that person to correctly perform a specific task.
NOTE: Requirements for competent persons are specified in Clause 4.
- 3.3.1 Nominal size (of a sling)
The nominal diameter dn of the chain in the sling (see Figure 1)….
The full copy of AS 3775.1 – 2014 Chain Slings for Lifting Purposes – Grade T(80) and V(100) Part 1: Product Specification can be purchased from SAI Global below.