AS 3850.1 – 2015 Prefabricated Concrete Elements Part 1: General Requirements

AS 3850.1 – 2015 Prefabricated Concrete Elements Part 1: General Requirements

AS 3850.1 – 2015 Prefabricated Concrete Elements Part 1: General Requirements provides requirements for the materials, components and equipment used in the manufacture of prefabricated concrete elements.

PREFACE
This Standard was prepared by the Standards Australia Committee BD-066, Tilt up Construction, to supersede, in part, AS 3850—2003, Tilt-up concrete construction.

This Standard incorporates Amendment No. 1 (January 2019). The changes required by the Amendment are indicated in the text by a marginal bar and amendment number against the clause, note, table, figure or part thereof affected. The AS 3850 series comprises the following parts:

AS

  • 3850 Prefabricated concrete elements
  • 3850.1 Part 1: General requirements
  • 3850.2 Part 2: Building construction

This Standard Covers:

SECTION 1 SCOPE AND GENERAL

  •  1.1 SCOPE
  •  1.2 APPLICATION
  •  1.3 NORMATIVE REFERENCES
  •  1.4 DEFINITIONS
  •  1.5 NOTATION

SECTION 2 MATERIALS, COMPONENTS AND EQUIPMENT

  •  2.1 GENERAL
  •  2.2 WORKING LOAD LIMIT (WLL) CALCULATION
  •  2.3 CONCRETE AND REINFORCEMENT
  •  2.4 CURING COMPOUNDS AND RELEASE AGENTS
  •  2.5 LIFTING, BRACE AND FIXING INSERTS
  •  2.6 LIFTING CLUTCHES
  •  2.7 BRACES
  •  2.8 LEVELLING PADS AND SHIMS
  •  2.9 CRANE AND RIGGING EQUIPMENT
  •  2.10 DOCUMENTATION

 

The full copy of AS 3850.1 – 2015 Prefabricated Concrete Elements Part 1: General Requirements  can be purchased from SAI Global below.

NOTE: These links were current at publishing but may have been updated. Please contact SAI Global or Standards Australia to ensure that you are purchasing the current standard.

Not the standard you’re looking for? Click here for a list of relevant Australian Standards.